Removing the Light Interception and Shutter Blades
•
Remove the Fixing Disk from the Base Ring (Figure 3-21) by removing the four
mounting screws.
•
Remove the Shoulder Screw from the center of the Light Interception Blade.
Note: The positions of the Light Interception and Shutter Blades relative to their
actuating pins, as the Blades are removed.
•
Lift out both Blades by gently pushing upwards with a fingertip from the underside
(front) of the Shutter.
Figure 3-21. Removing the light interception and shutter blades
51