Table of Contents
Advertisement
•
When replacing the Outer Housing, be sure the Bright Frame "b" (Figure 3-7) is in
front of the molded support "c" on the inside of the Outer Housing, and that support "c"
does not bind the Bright Frame after assembly.
Note: The Eye Cup is mounted with its thicker vertical edge "d" (Figure 3-8) nearest
the Camera Body.
•
Replace the Front Glass "f" shiny side out, frosted area at the bottom. Replace the
Front Cover "e" with the thicker vertical edge nearest the Camera Body (Figure 3-8).
Figure 3-8. Eye cup, front glass and front cover reassembly
Figure 3-7. Bright frame reassembly
37
Hide quick links:
Advertisement
Table of Contents
