•
If access to the interior of the Viewfinder is needed, do only 1 through 5 . If the
Viewfinder must be removed from the Camera Body, continue with
•
In
6 , the six wires from the Main PC Board which are fed through the Camera Body
must be unsoldered from the PC Plate, before the Viewfinder inner housing can be
removed from the Camera Body (Figure 3-5).
Figure 3-5. Unsoldering PC plate leads (viewfinder)
Reassembly
•
Do
1
through
•
When replacing the Shutter Button, be sure contact "a" in Figure 3-6 is first depressed
below the bottom of the Button.
7
on Figure 3-3 in reverse order.
Figure 3-6. Shutter button reassembly
36
6
and
7 .