Reassembling the Shutter
Replacing the Light Interception and Shutter Blades
•
Replace the Shutter Blade in the Base Plate/Base Ring, with pins "a" and "b" located
as shown in Figure 3-22A.
•
Place the Light Interception Blade on top of the Shutter Blade, with pins "a" and "b"
located as in Figure 3-22B.
•
Replace the Shoulder Screw to secure the Blades. (Be sure the unthreaded shoulder
passes through the center hole in each Blade and that the Blades turn freely.)
•
Replace the Fixing Disk on the Base Ring, using the four mounting screws.
Figure 3-22. Shutter and light interception blade reassembly
A
52
B