Attaching The Front Panel; Basic Operations - Pioneer DEH-X9650SD Owner's Manual

Section
02 Using this unit
1 Turn M.C. to change the year.
2 Press M.C. to select day.
3 Turn M.C. to change the day.
4 Press M.C. to select month.
5 Turn M.C. to change the month.
6 Press M.C. to confirm the selection.
Clock Setting (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to select time notation.
5 Turn M.C. to select the desired setting.
12H (12-hour clock)—24H (24-hour clock)
6 Press M.C. to confirm the selection.
FM step (FM tuning step)
Use FM step to set FM tuning step options (seek
step settings).
1 Turn M.C. to select the FM tuning step.
100kHz (100 kHz)—50kHz (50 kHz)
2 Press M.C. to confirm the selection.
! The manual tuning step is fixed at 50 kHz.
AM step (AM tuning step)
Use AM step to set AM tuning step options (seek
step and manual tuning step settings).
1 Turn M.C. to select the AM tuning step.
10kHz (10 kHz)—9kHz (9 kHz)
2 Press M.C. to confirm the selection.
Contrast (display contrast setting)
1 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or
decreased.
2 Press M.C. to confirm the selection.
Quit appears.
4
En
5 To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6 Press M.C. to select.
Notes
! You can set up the menu options from the
system menu and set up menu. For details
about the settings, refer to System menu on
page 16 and Set up menu on page 17.
! You can cancel set up menu by pressing
SRC/OFF.

Attaching the front panel

Important
! Handle the front panel with care when re-
moving or attaching it.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Using this unit
DEH-X9650BT/DEH-X9650SD
Removing the front panel
1 Press the open button to open the front panel.
2 Grip the left side of the front panel and pull it
gently outward.
Take care not to grip it too tightly or to drop the
front panel and protect it from contact with
water or other fluids to prevent permanent
damage.
3 Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1 Reattach the front panel by holding it upright
to the unit and clipping it securely into the
mounting hooks.
DEH-X8650BT/DEH-X7650SD
Removing the front panel
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull
it toward (N) you.
3 Always store the detached front panel in a pro-
tective case or bag.
Re-attaching the front panel
1 Slide the front panel to the left.
2 Press the right side of the front panel until it is
firmly seated.
Forcing the front panel into place may result in
damage to the front panel or head unit.

Basic operations

Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns
off.