Temperature-Related Alerts; Connection Alerts - NETGEAR AirCard 790S User Manual

2. From a computer or wireless device that is connected to your network, launch an Internet
browser.
3. Enter http://hotspot.zain or http://192.168.1.1.
A login screen displays.
4. Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
5. Enter the micro SIM PIN when prompted.
6. Click the Save button.

Temperature-Related Alerts

The hotspot is designed to work over a wide temperature range. (For information, see
Environmental Specifications
goes out of the supported temperature range.
Move the device to an area where the temperature is more suitable and, if the mobile hotspot
is too warm, make sure that the area is well ventilated and air can circulate around the
device.
Note: The battery might not recharge if the mobile hotspot is outside the
operating temperature range.

Connection Alerts

Some connection alerts include instructions for resolving them. For other connection alerts,
including those in the following table, contact customer service for assistance.
Table 4. Connection alerts
Alert Description
8 Operator determined barring
25 LLC or SNDCP failure
26 Insufficient resources
27 Missing or unknown APN
28 Unknown PDP address or type
29 User authentication failed
30 Activation rejected by GGSN
32 Service Option not supported
Zain Mobile Hotspot
on page 106.) The mobile hotspot shuts down automatically if it
Troubleshooting
102