Enable DMZ
In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in
the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of
protection for the rest of the network, and sending all incoming data to a particular IP
address.
To enable the DMZ and designate a computer to screen incoming traffic:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter http://hotspot.zain or http://192.168.1.1.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4.
Select Settings > Router > Basic.
5.
In the DMZ section, select the On radio button next to DMZ Enabled.
6.
In the DMZ Address field, enter the IP address of the computer to which you want all data
sent.
Zain Mobile Hotspot
Advanced Settings
85