Set Up And Connect To The Internet; Install The Micro Sim Card - NETGEAR AirCard 790S User Manual

Set Up and Connect to the Internet

The battery and micro SIM card are pre-installed in your hotspot. If you need to re-install
these components, complete the steps in the sections listed in steps 1 and 2.

To set up and connect to the Internet:
1.

Install the Micro SIM card.

For more information, see
2. Install the battery.
For more information, see
3. Connect to the Internet.
For more information, see
4. Personalize the hotspot.
For more information, see
Install the Micro SIM Card

To insert the SIM card:
1. Remove the hotspot back cover by lifting at the notch on either corner of the device.
2. If present, remove the battery.
3. Insert the micro SIM card.
Zain Mobile Hotspot
Install the Micro SIM Card
Install the Battery on page 14.
Connect to the Internet
Personalize the Hotspot
Micro SIM card
Get Started
13
on page 13.
on page 15.
on page 16.