Using "Image Data Converter; Using "Remote Camera Control - Hasselblad Lusso Operation Manual

Notes
• Operation cannot be assured in an environment that is based on an upgrade of the
operating systems described above or in a multi-boot environment.
• If you connect 2 or more USB devices to a single computer at the same time, some
devices, including the camera, may not operate, depending on the types of USB devices
you are using.
• Connecting the camera using a USB interface that is compatible with Hi-Speed USB
(USB 2.0 compliant) allows advanced transfer (high speed transfer), as the camera is
compatible with Hi-Speed USB (USB 2.0 compliant).
• When your computer resumes activity from suspend or sleep mode, communication
between the camera and your computer may not recover at the same time.

Using "Image Data Converter"

With "Image Data Converter", you can do the following:
• You can play back and edit images recorded in RAW format with various corrections,
such as tone curve and sharpness.
• You can adjust images with white balance, exposure, and [Creative Style], etc.
• You can save the images displayed and edited on a computer.
You can either save the image as RAW format or save it in a general file format.
• You can display and compare the RAW images and JPEG images recorded by this
camera.
• You can rank images in 5 grades.
• You can apply color labels.
To use "Image Data Converter, " refer to Help.
Click [Start]  [All Programs]  [Image Data Converter]  [Help] 
[Image Data Converter Ver.4].
"Image Data Converter"

Using "Remote Camera Control"

Connect the camera to your computer. With "Remote Camera Control" you can:
• Set up the camera or record an image from the computer.
• Record an image directly to the computer.
• Perform an Interval Timer Shooting.
Set up the following before use: MENU 
[PC Remote]
support page (English only)
(Setup) 4 [USB Connection]
Using the software
GB
61