To The Camera - Hasselblad Lusso Operation Manual

Notes
• When attaching a lens, do not press the lens release button.
• Do not use force when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). To use the Mount Adaptor, refer to the operating manual supplied with the
Mount Adaptor.
• When you want to shoot full-frame images, use a lens designed for a full-frame camera.
• When carrying the camera with a lens attached, hold both the camera and the lens
firmly.
• Do not hold the part of the lens that is extended for the zoom or focus adjustment.
To remove the lens
1
Press the lens release button
all the way in and turn the lens
counterclockwise until it stops.
2
Attach the caps to the front and
rear of the lens and the body cap

to the camera.

• Before you attach them, remove any dust
from them.
Notes
When changing the lens, if dust or debris gets inside the camera and adheres to the surface
of the image sensor (the part that converts the light to an electric signal), it may appear as
dark spots on the image, depending on the shooting environment.
The camera is equipped with an anti-dust function to prevent dust from landing on the
image sensor. However, always make sure to quickly change the lens away from dusty
locations when attaching/removing a lens.
Attaching a lens
Lens release button
GB
45