Table of Contents
Advertisement
Identifying parts
Battery insertion slot
Battery cover
Tripod socket hole
• Use a tripod with a screw less
than 5.5 mm (7/32 inches) long.
Otherwise, you cannot firmly secure
the camera, and damage to the
camera may occur.
GB
18
Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately). Insert
the connection plate into the battery
compartment, and then pass the cord
through the connection plate cover as shown
below.
• Make sure that the cord is not pinched
when you close the cover.
Advertisement
Table of Contents
