Attaching A Lens - Hasselblad Lusso Operation Manual

Attaching a lens

Attaching a lens
Set the power switch of the camera to OFF before you attach or remove the lens.
1
Remove the body cap from
the camera and the rear lens
cap from the rear of the lens.
• When changing the lens, quickly
change the lens away from dusty
locations to keep dust or debris from
getting inside the camera.
• When shooting, remove the front lens
cap from the front of the lens.
2
Mount the lens by aligning
the white index marks
(mounting indexes) on the
lens and camera.
• Hold the camera with the lens facing
down to prevent dust from entering
into the camera.
3
While pushing the lens
lightly toward the camera,
turn the lens clockwise
until it clicks into the locked
position.
• Be sure to put the lens on straight.
GB
44
Rear lens cap
White index marks
Body cap