Table of Contents
Advertisement
Selecting a function using the Fn
(Function) button
This button is used for setting up or executing functions used frequently in shooting,
except for functions from the Quick Navi screen.
1
Press the DISP on the control wheel to set the screen mode to
other than [For viewfinder].
2
Press the Fn button.
3
Select the desired item using
The setting screen appears.
4
Select the desired setting
by turning the front dial,
then press on the control
wheel.
• Some setting values can be finely
adjusted by turning the rear dial.
To set the individual settings in
the dedicated screen.
In step 3, select a setting item and press
the control wheel to switch to the dedicated
screen for the setting item. Set the items
according to the Operation guide.
Selecting a function using the Fn (Function) button
on the control wheel.
on
Operation guide
GB
27
Advertisement
Table of Contents
