Table of Contents
Advertisement
Functions that can be selected using the MENU button
(Setup)
Monitor Brightness
Viewfinder Brightness
Finder Color Temperature
Volume Settings
Audio signals
Upload Settings
Tile Menu
Mode Dial Guide
Delete Confirmation
Display Quality
Power Save Start Time
PAL/NTSC Selector (only for
1080 50i compatible models)
Cleaning Mode
Demo Mode
Remote Control
HDMI Resolution
CTRL FOR HDMI
HDMI Info. Display
USB Connection
USB LUN Setting
Language
GB
36
Sets the screen brightness. (Manual/Sunny Weather)
When using an electronic viewfinder, sets the brightness of the
electronic viewfinder. (Auto/Manual)
Sets the color temperature of the viewfinder.
Sets the volume for movie playback.
Sets whether to sound a beep during auto focus or self-timer
operations. (On/Off)
Sets the upload function of the camera when using an Eye-Fi card.
(On/Off)
Sets whether to display the tile menu every time you press the MENU
button. (On/Off)
Turns the mode dial guide (the explanation of each shooting mode)
on or off.(On/Off)
Sets which of Delete and Cancel is preselected in the Delete
confirmation screen. ("Delete" first /"Cancel" first)
Sets the display quality. (High/Standard)
Sets the length of time until the camera turns off automatically.
(30 Min/5 Min/2 Min/1 Min/10 Sec)
By changing the TV format of the device, shooting in a different movie
format is possible.
Starts the cleaning mode to clean the image sensor.
Sets demonstration playback of a movie to on or off. (On/Off)
Sets whether to use the infrared remote control. (On/Off)
Sets the resolution when the camera is connected to an HDMI TV.
(Auto/1080p/1080i)
Operates the camera from a TV that supports "BRAVIA" Sync.
(On/Off)
Selects whether or not to display information to the TV while
connected to a HDMI compatible TV. (On/Off)
Sets the USB connection method.
(Auto/Mass Storage/MTP/PC Remote)
Enhances compatibility by limiting the functions
of USB connection. Set to [Multi] in normal conditions and to [Single]
only when the connection between the camera and a computer or AV
component cannot be established. (Multi/Single)
Selects the language.
Advertisement
Table of Contents
