Epson TM-H6000 Service Manual page 65

Confidential
37. Attach the hook spring to the thermal case.
38. Attach the rack plate to the thermal case.
39. Snap fit the thermal button to the thermal case, and insert the hook plate.
40. Install the thermal case onto the M-T6000. Align the bosses on the left and right one at a time
in the rack, and insert one on the left and two on the right.
41. Hook L, R thermal springs to the thermal frame rack.
42. Close the thermal case.
43. Open the M-T6000 cover.
44. Attach the thermal mechanism cover with four screws.
45. Close the thermal mechanism cover.
46. Attach the ribbon cassette cover to the upper case. Align and insert the nibs on the ribbon
cover hinge.
Disassembly and Assembly 2-36 Rev. A