Epson TM-H6000 Service Manual page 50

Confidential
62. Hook the paper feed frame fixing lever L (type B) and the paper feed frame fixing lever
spring (type B) to the platen lever frame assembly. Insert the platen lever shaft frame while
attaching the paper feed frame fixing lever spring (type B) onto the paper feed frame fixing
lever L (type B). Use the longer spring here.
63. Hook the paper feed frame fixing lever R and the paper feed frame fixing lever spring (type
A) to the platen lever assembly frame. Insert the platen lever shaft frame while attaching the
paper feed frame fixing lever spring (type A) onto the paper feed frame fixing lever R.
64. Insert the platen earth B plate into the platen lever assembly frame.
65. Insert the slip feed roller holder onto the slip feed roller. Insert the D-cut in the slip feed
roller on the right side, and insert the legs of the slip feed roller holder on the bottom side.
66. Attach the slip feed roller to the platen lever. Place the hinge so that it is facing upward and
insert the D-cut on the right side with the platen assembly attachment to the front. Insert the
slip feed roller holder into the third hole from the left of the platen roller.
67. Use a pressing jig to push the slip drive gear into the slip feed roller. Attach with one E-ring.
68. Lubricate both sides of the slip feed roller and the slip feed roller support and rotate.
Rev. A
679 Paper feed frame fixing L lever (type B) assembly
642 Paper feed frame fixing lever spring (type B)
Paper feed frame fixing lever spring (type A)
669 Platen lever frame assembly
652 Platen ground plate (type B)
Figure 2-18
TM-H6000/H6000P Service Manual
670
Paper feed frame
fixing R lever
assembly
640
Disassembly and Assembly 2-21