Epson TM-H6000 Service Manual page 37

Confidential
7. Firmly tighten the carriage motor lead wire stopper screw.
8. Use one screw to attach the carriage to the carriage sub assembly.
9. Set the intermediate circuit board cover onto the intermediate circuit board.
10. Position and attach the intermediate circuit board to two nibs on the carriage frame
assembly. Fix with two screws. (see the illustration on the next page.)
Disassembly and Assembly 2-8
604
Oil ring
677 Carriage assembly
610
Carriage spring
Figure 2-8
604 Oil ring
688 E-ring(5)
629 Carriage guide shaft
Rev. A