Epson TM-H6000 Service Manual page 48

Confidential
Note:
Check that the soldering is secure.
55. Insert the wiring.
56. Affix the R cover detector cable assembly to the main circuit board with adhesive tape.
57. Attach the MICR plate shutter to the slip guide lower frame (type B) with one screw.
Lever motor T.P. detector
assembly
Rev. A
671
Slip T.O.F. detector assembly
672
691
screw(C.B.S-tite F,3X6)
704 Paper feed motor
722
screw(C.B.P-tite,3X8)
673
Main circuit board assembly
(for M-U675)
691
screw(C.B.S-tite F,3X6)
Figure 2-16
TM-H6000/H6000P Service Manual
691
screw(C.B.S-tite F,3X6)
691
screw(C.B.S-tite F,3X6)
653
MICR shutter
Disassembly and Assembly 2-19