Table of Contents
Advertisement
8. Install t he 6" (15.24cm)elbow of theblower h ousing
INSTALLING THE BLOWER
andsecure withduct tape.Theopenendof theelbow
should be pointed to theleft.Attachthe6" (15.24cm)
NOTE: Install the blower prior to installing the
flex duct(provided w iththe range) t otheelbow andto
range.
the range.Note:For right sideventing, t he6" (15.24
cm)diameter flexductmaybecutin halfandusedin
S Refertoyourductplan.It maybe easiertoattachpart
orderto makeassembly easier,
of the ductingto the blowerbeforeit isinstalled.
S Positionthe blowerand attachto the floorwithat least
2 screws.
S Applyduct tapeto blowerexhaustductjoint. (See
figure12).
RANGE INSTALLATION
CONNECTING
THE DOWNDRAFT
BLOWER
INSTALLING
THE RANGE
TO ELECTRICAL (Figure18)
$ Alignthe range to itsdesignated location andslide
S Connect t he blower p ower cordtotheblower m otor
backintoposition. Makesurethatthe rearleveling leg
housing,
is fullyinsertedand securedby the anti-tipbracket.
BLOWER
POWERCORO
S Attachtheotherendof the flexductto the plenum of
the rangeusing the second ductclamp. T ighten duct
clampto secureittothe plenum.
CHECK FOR OPERATION
S Install t he airfilter. A s youfacethe range, t hetopof
thefiltershould restagainst t he leftsideof the vent
opening. DO NOTOPERATETHESYSTEM
WITHOUTTHE FILTER.
S Install t heair gdlleovertheventopening.
Figure18
S Besureto remove allpacking materials theovenfrom
INSTALLING
THE FLEX DUCT TO BLOWER
unitpdorto applying p ower.
S Useoneofthe duct clamps provided. Using a screw
S Switch electrical circuit b reaker t o theON position.
driver, t ighten ductclamptosecure theflexducttothe
inletof theblower. ( Seefigure19).
$ Consult U SEandCAREMANUAL forproper operation.
....
....
L)
Figure19
-10-
Advertisement
Table of Contents
