Pci / Plug And Play Setup - ECS K7VMM User Manual

ResumeOn PME#/LAN/Ring
The system can be turned off by a software command. If you enable this item,
the system can automatically resume if there is traffic on the onboard network
adapter or PCI LAN/Modem card. You must use an ATX power supply in order
to perform this feature.
PowerOn by KBC Wake up key Wake up password
If you enable this item, system can
keys on the keyboard or typing in the password. You must enable the Key-
board Power On jumper and use an ATX power supply in order to use this
feature.
PowerOn by RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you enable this
item, the system can automatically resume at a fixed time based on the sys-
tem's RTC (realtime clock). Use the items below this one to set the date and
time of the wake-up alarm. You must use an ATX power supply in order to use
this feature.

PCI / Plug and Play Setup

This page sets some of the parameters for devices installed on the PCI bus
and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Meg atrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Share Memory Size
Primary Graphics Adapter
Allocate IRQ for PCI VGA
Plug and Play Aware O/S
Enable this item if you are using an O/S that supports Plug and Play such as
Windows 95 or 98.
Share Memory Size
This item lets you allocate a portion of the main memory for the onboard VGA
display application with 8/16/32MB options.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or the AGP
bus. The default PCI setting still lets the onboard display work and allows the
use of a second display card installed in a PCI slot.
automatically resume by pressing hot
Yes
32MB
PCI
Yes
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
28
↑ ↓ ←→ : Select Item
PU/PD/+/ - : Modify
: Color