Installing Add-On Cards - ECS K7VMM User Manual

Installing Add-on Cards

This mainboard has two 32-bit PCI (Peripheral Components Interconnect)
expansion slots, one 4xAGP slot, and one Communications and Networking
Riser (CNR) slot.
AGP Slot The 4xAGP slot is used to install a graphics adapter that supports the
4xAGP specification and has a 4xAGP edge connector.
PCI Slots PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
CNR Slot This slot is used to insert CNR cards with Modem and Audio func-
tionality.
Note: Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually con-
figure the card before installation.
16