Load Optimal Settings; Load Best Performance Settings; Features Setup Page - ECS K7VMM User Manual

Allocate IRQ for PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics sys-
tem. You set this value to No to free up an IRQ.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of fail-safe default values. These
default values are not very demanding and they should allow your system to
function with most kinds of hardware and memory chips.
Note: It is highly recommended that users enter this option to load optimal val-
ues for accessing the best performance.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you press Y,
and then Enter, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not
function properly if you are using slower memory chips or other low-
performance components.

Features Setup Page

This page sets some of the parameters for peripheral devices connected to
the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial PortA
OnBoard IR Port
OnBoard Parallel Port
Parallel Port Mode
Parallel Port IRQ
Parallel Port DMA
OnBoard Game Port
OnBoard MIDI Port
MIDI Port IRQ
OnBoard IDE
OnChip LAN
OnBoard AC'97 Audio
OnBoard MC'97 Modem
USB Controller
USB Device Legacy Support
ThumbDrive Support For DOS Disabled
OnBoard FDC
This item enables or disables the onboard floppy disk drive interface.
OnBoard Serial PortA
These items enable or disable the onboard COM1 serial port, and assign a
port address.
Enabled
3F8h/COM1
Disabled
378h
SPP
7
N/A
201h
ESC : Quit
300h
F1 : Help
10
Both
F5 : Old Values (Shift)F2
Disabled
F6 : Load BIOS Defaults
Enabled
F7 : Load Setup Defaults
Auto
All USB Port
Disabled
29
↑↓←→ : Select Item
PU/PD/+/ - : Modify
: Color