156
4-2. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the electronic key on your
person starts the hybrid system or changes power switch modes.
Starting the hybrid system
Check that the parking brake is set.
1
Firmly depress the brake pedal.
2
Check that the power switch indicator turns green. If the indicator does not turn
green, the hybrid system cannot be started.
When the shift position is N, the hybrid system cannot start. Shift the shift position to P
when starting the hybrid system. (P. 163)
Press the power switch.
3
Continue depressing the brake pedal
until the hybrid system is completely
started.
The hybrid system can be started from
any power switch mode.
Check that the "READY" indicator is illuminated.
4
If the "READY" indicator changes from a flashing light to a solid light and the buzzer
sounds, the hybrid system is starting normally.
The vehicle will not move when the "READY" indicator is off.
The vehicle can move when the "READY" indicator is on even if the engine is stopped.
(The gasoline engine starts or stops automatically in accordance with the state of the
vehicle.)
CT200h_OM_OM76174U_(U)
I n f o r ma t i o n P r o v i d e d b y :