Lexus CT200h Operating Manual page 147

WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
When shifting the shift position
■
Do not let the vehicle roll backward while a forward driving position is selected, or roll
●
forward while the shift position is in R.
Doing so may result in an accident or damage to the vehicle.
Do not shift the shift position to P while the vehicle is moving.
●
Doing so can damage the transmission and may result in a loss of vehicle control.
Do not shift the shift position to R while the vehicle is moving forward.
●
Doing so can damage the transmission and may result in a loss of vehicle control.
Do not shift the shift position to D while the vehicle is moving backward.
●
Doing so can damage the transmission and may result in a loss of vehicle control.
Moving the shift position to N while the vehicle is moving will disengage the hybrid
●
system. Engine braking is not available with the hybrid system disengaged.
Be careful not to change the shift position with the accelerator pedal depressed.
●
Changing the shift position to any positions other than P or N may lead to unex-
pected rapid acceleration of the vehicle that may cause an accident and result in
death or serious injury.
After changing the shift position, make sure to confirm the current shift position dis-
played on the shift position indicator inside the meter.
If you hear a squealing or scraping noise (brake pad wear limit indicators)
■
Have the brake pads checked and replaced by your Lexus dealer as soon as possible.
Rotor damage may result if the pads are not replaced when needed.
It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those
of the brake discs are exceeded.
When the vehicle is stopped
■
Do not depress the accelerator pedal unnecessarily.
●
If the shift position is any position other than P or N, the vehicle may accelerate sud-
denly and unexpectedly, causing an accident.
In order to prevent accidents due to the vehicle rolling away, always keep depressing
●
the brake pedal while stopped with the "READY" indicator is illuminated, and apply
the parking brake as necessary.
If the vehicle is stopped on an incline, in order to prevent accidents caused by the
●
vehicle rolling forward or backward, always depress the brake pedal and securely
apply the parking brake as needed.
Avoid revving or racing the engine.
●
Running the engine at high speed while the vehicle is stopped may cause the exhaust
system to overheat, which could result in a fire if combustible material is nearby.
CT200h_OM_OM76174U_(U)
4-1. Before driving
I n f o r ma t i o n P r o v i d e d b y :
147
4