Install Options And Extension Brackets - ECS P6BAP-Me User Manual

Install Options and Extension Brackets

On this mainboard you can install an optional infrared port. In order to
use the built-in fax modem you must install the fax/modem extension
bracket. If you have a 24-bit digital audio device, you can connect it to
the SPDIF digital audio connector.
Infrared Port and Digital Audio
SIR1
SPDIF1
1. If you want to install an optional serial infrared port, connect the
cable from the optional IR port to the IR connector on the mainboard.
2. After you have connected the cable, secure the option to the
appropriate place on your system case.
Note: An infrared port uses some of the same resources as the
built-in fax/modem and the second serial port. If you have installed
the infrared port, you might have to use your system's device
manager to reallocate resources between the infrared port and the
fax/modem or second serial port. You might not be able to run
both devices at the same time.
Use the SPDIF1 In/Out connector to connect a digital audio extension
bracket to your system. If you have CD-ROM drive or DVD drive with
digital output, you can use an internal digital audio cable to connect the
digital audio output of the drive to the input pins of the SPDIF1 connector.
The input pins are marked with a white box in the illustration.
32