Power Management Setup Option - ECS P6BAP-Me User Manual

On Board Modem
Use this item to enable or disable the onboard fax/modem that is integrated on
this mainboard.
Auto-Detect DIMM/PCI Clk
If this item is enabled, the system reduces EMI (electromagnetic interference) by
turning off the clock generator signal to DIMM slots or PCI slots that are
unoccupied.
Spread Spectrum
When this item is enabled, it can significantly reduce the EMI (electrical magnetic
interference) that your system generates. However, it can cause timing critical
devices, such as SCSI host adapters, to malfunction. We recommend that you
leave this item at the default value.
Current CPU Temp., Current System Temp., etc.
If you are using the hardware monitoring features of this system, you can use
these items to set thermal and electrical parameters for the system.

Power Management Setup Option

This option displays items which let you control the system power
management. Modern operating systems take care of much of the power
management. This mainboard supports ACPI (advanced configuration
and power interface). This system supports three power-saving modes;
doze mode, standby mode, and suspend mode. Standby mode uses
less power than doze mode and suspend mode uses the least power.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the system is
inactive for a time, the timeouts begin counting. If the inactivity continues
so that the timeout period elapses, the system enters a power-saving
mode. If any item in the list of PM Events is Enabled, then any activity on
that item will restart the timeout counters.
Wake Up Calls
If the system is suspended, or has been powered down by software, it
can be resumed by a wake up call that is generated by incoming traffic
to a modem or LAN card, or a fixed alarm on the system realtime clock.
44
Default: Enabled
Default: Enabled
Default: Disabled