ECS P6BAP-Me User Manual page 21

Bank 0/1 DRAM Timing
Bank 2/3 DRAM Timing
Bank 4/5 DRAM Timing
These three fields define the speed of the memory chips that you can install in
each of the three DIMM slots. For this motherboard, you must install SDRAM
memory modules. Select SDRAM 10ns if the memory is rated for 10ns access
time, or SDRAM 8ns if the memory is rated for 8ns access time. If you're not
sure, select SDRAM 10ns as a default that ensures reliability.
SDRAM Cycle Length
DRAM Clock
These two items determine timing parameters for system memory. We
recommend that you leave these items at the default value.
Memory Hole
This item can be used to reserve memory space for some ISA expansion cards
that require it.
Read Around Write
Concurrent PCI/Host
These two items determine how the system organizes read/write operations over
the system's memory and PCI buses. These items are determined by the
mainboard chipset so leave these items at the default value.
System BIOS Cacheable
Video BIOS Cacheable
These items allow the video and/or system BIOS to be cached in memory for
faster execution. We recommend that you leave these items at the default value.
Video RAM Cacheable
This item determines if the system Video RAM can be cached to main memory
for faster execution. We recommend that you leave this item at the default value.
I/O Recovery Time
This item sets timing parameters for legacy 8-bit and 16-bit ISA expansion cards.
We recommend that you leave these items at the default value Enabled.
AGP Aperture Size
This item defines the size of the aperture if you use an AGP graphics adapter. It
refers to a section of the PCI memory address range used for graphics memory.
AGP-2X Mode
This item lets you improve performance by doubling the speed of the AGP bus.
This function is supported by this mainboard so we recommend that you leave
this item at the default value Enabled.
On Board Sound
Use this item to enable or disable the onboard audio system that is integrated on
this mainboard.
Default: SDRAM 10ns
Default: SDRAM 10ns
Default: SDRAM 10ns
Default: 3
Default: Host CLK
Default: Disabled
Default: Disabled
Default: Disabled
Default: Disabled
Default: Disabled
Default: Disabled
Default: Enabled
Default: 64M
Default: Enabled
Default: Enabled
43