Install The Extension Brackets - ECS ES4M Series User Manual

Mainboard User's Manual
Connect the case switches and indicator LEDs to the FP1 header.
Here is a list of the FP1 header's pin assignments.
Pin Signal
1 HDLED+
3 HDLED-
5 RSTGND
7 RESET
9 RESEV
If there are a headphone jack or/and a microphone jack on the front
panel, connect the cables to the JP5 header on the mainboard. Here
is a list of the JP5 header's pin assignments.
Pin
1
3
5
7

Install the Extension Brackets

The extension brackets connect features on the mainboard to
external connectors that can be attached to the system chassis.
Follow these steps below to install the extension brackets.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
16
Pin Signal
2 PWR/SLP+
4 PWR/SLP+
6 PSW+
8 PSW-
10 KEY
Signal Pin Signal
GND 2 GND
MICI 4 MICO
SPR 6 SPRO
SPL 8 SPLO