Discover Button; Discover - Honeywell MX9 Reference Manual

Discover Button

When tapped, the Bluetooth client discovers and displays all Bluetooth devices in the vicinity. Bluetooth managed devices
should be as close as possible
At the end of the Discover process, and when
Bluetooth scanners and printers are displayed in the Device table. When Filtered Mode is enabled/checked, only Bluetooth
scanners and printers are displayed in the Device table.

Discover

Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also queries for the
unique identifier of each device discovered.
Tap Stop at any time to end the Discover and Query for Unique Identifier functions.
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX9 Bluetooth scanning range, the
Bluetooth connection between the paired device and the MX9 is lost. There may be audible or visual signals as paired
devices disconnect from the MX9.
1
No more than 32.80 feet (10 meters) line of sight in a quiet environment.
1
, in direct line of sight, with the MX9 during the Discover process.
Filtered Mode is disabled/unchecked, serial Bluetooth devices as well as
4-79