Honeywell MX9 Reference Manual page 195

6. Click the OK button to dismiss the About CERDisp dialog box on the MX9 desktop by clicking the OK button in the
HSMConnect window on the PC desktop. The dialog box automatically times out and disappears after approximately
20 seconds.
7. The MX9 can now be configured from the HSMConnect window. Input from the PC's mouse and keyboard are
recognized as if they were attached to the MX9.
8. When the remote session is completed, terminate the HSMConnect program by selecting File > Exit or clicking on the X
in the upper right hand corner to close the application, then disconnect the ActiveSync cable.
5-7