Bluetooth Indicators - Honeywell MX9 Reference Manual

Bluetooth Indicators

The Bluetooth icon state and Bluetooth LED state change as Bluetooth devices are discovered, paired, connected and
disconnected.
There may be audible or visual signals as paired devices re-connect with the MX9.
Taskbar Icon
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the MX9 Bluetooth scan range, the
Bluetooth connection between the paired device and the MX9 is lost. There may be audible or visual signals as paired
devices disconnect from the MX9.
Bluetooth LED
Blue, blinking slowly
Blue, blinking medium
Blue, blinking fast
Off
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it stop authorized Bluetooth-
enabled devices from pairing with the MX9 while AppLock is in control.
4-88
MX9 is connected to one or more of the targeted Bluetooth device(s).
MX9 is not connected to any Bluetooth device.
MX9 is ready to connect with any Bluetooth device.
MX9 is out of range of all paired Bluetooth device(s). Connection is inactive.
Legend
Bluetooth is active but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering other Bluetooth devices.
Bluetooth hardware has been turned off or does not exist in theMX9.
Legend