Changing A Sensors Supervision; Changing A Sensors Restore Requirements; Entry Delay Time; Exit Delay Time - Linear DVS-1200 Installation & Programming Instructions

CHANGING A SENSORS SUPERVISION

✦ When a sensor is programmed, the Console
automatically recognizes it as supervised or
non-supervised.
✦ The Console expects hourly status transmissions
from any sensor programmed as supervised.
✦ Any sensor can be programmed as supervised or
non-supervised.
✎ NOTE: Don't program a sensor that doesn't send
status transmissions as supervised.

CHANGING A SENSORS RESTORE REQUIREMENTS

✦ When a sensor is programmed, the Console
automatically recognizes it as manual or automatic
restoring.
✦ The Console expects restoral signals from any
wireless sensor programmed as manual restore.
✦ Any sensor can be programmed as manual or
automatic restore.
✎ NOTE: Don't program a sensor that doesn't send
restoral transmissions as manual restore.

ENTRY DELAY TIME

✦ The factory-set Entry Delay time is 30 seconds.
STEP #25 The Entry Delay time can be adjusted from 20 to
255 seconds using this step.
❑ Write the new Entry Delay time in the User's Guide.
✎ NOTE: Don't make the Entry Delay too short. The
user may not have enough time to disarm the
system before an alarm.

EXIT DELAY TIME

✦ The factory-set Exit Delay time is 60 seconds.
STEP #26 The Exit Delay time can be adjusted from 20 to 255
seconds using this step.
❑ Write the new Exit Delay time in the User's Guide.

BURGLARY SIREN TIME

✦ The factory-set burglary siren time is fi ve minutes
(UL installation maximum).
STEP #30 The burglary siren time can be adjusted from one to
30 minutes using this step.

EMERGENCY SIREN TIME

✦ The factory-set emergency siren time is fi ve
minutes (UL installation maximum).
STEP #31 The emergency siren time can be adjusted from
one to 30 minutes using this step.
26
SENSOR NUMBER
TO CHANGE
PROGRAM
HOME
16 FOR NON-SUPERVISED
17 FOR SUPERVISED
STORE PROGRAM
AWAY
SENSOR NUMBER
TO CHANGE
PROGRAM
HOME
18 FOR MANUAL RESTORE
19 FOR AUTO RESTORE
AWAY STORE PROGRAM
PROGRAMMING STEP #25
JKL
PROGRAM
TIME IN SECONDS (20-255)
STORE PROGRAM
PROGRAMMING STEP #26
PROGRAM
TIME IN SECONDS (20-255)
AWAY
STORE PROGRAM
3
DEF
PROGRAMMING STEP #30
0
PROGRAM
HOME
TIME IN MINUTES (1-30)
STORE PROGRAM
AWAY
3
DEF
PROGRAMMING STEP #31
1
PROGRAM
HOME
TIME IN MINUTES (1-30)
AWAY STORE PROGRAM