Making A Sensor A 24-Hour Door Chime; Making A Sensor Interior - Linear DVS-1200 Installation & Programming Instructions

MAKING A SENSOR A 24-HOUR DOOR CHIME

✦ Sensors can be programmed to cause the Console
to chime any time they're activated.
✦ Chime-only sensors will not be able to trigger the
alarm in any Console mode.
✦ The sensor must have already been programmed
into the Console (see "Adding Sensors to the
System" for details).
1. Start with the Console in Test Mode.
2. Enter the master user code then press TEST.
✴ A "Gong" and fi ve "Beeps" will sound.
✴ The sensor status indicators will light for each sensor
programmed into the Console.
3. Enter the sensor number from 01-12 (you must
enter two digits, example: 5 = 05).
✴ The sensor status indicator light will fl ash for the sensor
number selected.
4. Press HOME, 8, then AWAY.
✴ A "Bing" tone will sound and the sensor status indicator will
light steady.
5. Enter another sensor number, or exit Setup Mode
by pressing the
seconds.

MAKING A SENSOR INTERIOR

✦ Wireless motion detectors are automatically
programmed as interior sensors. Any other sensor
can also be programmed as an interior sensor.
✦ Interior sensors can only trigger an alarm when the
Console is in the Away Mode.
✦ "Home Interior" sensors can trigger an alarm when
the Console is in the Home or Away mode.
✦ The sensor must have already been programmed
into the Console (see "Adding Sensors to the
System" for details).
1. Start with the system in Test Mode.
2. Enter the master user code then press TEST.
✴ A "Gong" and fi ve "Beeps" will sound.
✴ The sensor status indicators will light for each sensor
programmed into the Console.
3. Enter the sensor number from 01-12 (you must
enter two digits, example: 5 = 05).
✴ The sensor status indicator light will fl ash for the sensor
number selected.
4. Press HOME, 7, then AWAY.
✴ A "Bing" tone will sound and the sensor status indicator will
light steady.
5. Enter another sensor number, or exit Setup Mode
by pressing the
seconds.
key then press OFF for three
key then press OFF for three
START IN TEST
MASTER
USER
CODE
1 GONG &
TEST
5 BEEPS
SENSOR
NUMBER
FOR CHIME
HOME
8 FOR
8 CHIME
TUV
ZONE
AWAY 1 BING
DONE
START IN TEST
MASTER
USER
CODE
1 GONG &
TEST
5 BEEPS
SENSOR
NUMBER
FOR
INTERIOR
HOME
7 FOR
INTERIOR
7
PRS
ZONE
AWAY 1 BING
DONE
23