System Control System Adjustments; Initialization Of 8, A, B, C, D, E, F, 1B, 1E; Page Data; Touch Panel Adjustment - Sony DCR-TRV940 Adjustment Manual

DCR-TRV940/TRV940E/TRV950/TRV950E
COVER COVER
3-2.

SYSTEM CONTROL SYSTEM ADJUSTMENTS

1. Initialization of 8, A, B, C, D, E, F, 1B, 1E, 1F

Page Data

If the 8, A, B, C, D, E, F, 1B, 1E, 1F page data is erased due to
some reason, perform "1-2. INITIALIZATION OF 8, A, B, C, D,
E, F, 1B, 1E, 1F PAGE DATA" of "CAMERA SYSTEM ADJUST-
MENTS".
Check that the data of page: 0, address: 10 is "00".
If not, select page: 0, address: 10, and set the data "00".

2. Touch Panel Adjustment

Adjust the calibration of touch panel.
Mode
Signal
Adjustment Page
Adjustment Address
Note 1: Check that the data of page: 0, address: 10 is "00".
Note 2: Adjustment must be performed while observing the LCD
screen from the front.
Adjusting method:
1) Select page: 7, address: 05, and set data: 01.
2) Using a ball-point pen etc., push the center of " " indicated
in the part A.
3) Using a ball-point pen etc., push the center of " " indicated
in the part B.
4) Using a ball-point pen etc., push the center of " " indicated
in the part C.
5) Select page: 7, address: 05, and set data: 00.
A
VTR stop
Arbitrary
A
90 to 93
C
B
Fig. 6-3-4
6-54