Flange Back Adjustment (Using The Flange Back Adjustment Chart And Subject More Than 500 M Away) - Sony DCR-TRV940 Adjustment Manual

5. Flange Back Adjustment
(Using the flange back adjustment chart and
Subject More than 500 m Away)
The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.
5-1. Flange Back Adjustment (1)
Subject Flange back adjustment chart
(2.0 m from the front of lens)
(Luminance: 300 to 400 lux)
Measurement Point Adjusting remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 60 to 70
Specified value Data of page: F, address: 6F is
"00" to "0E"
Note 1: Perform "HALL Adjustment" and "MR Adjustment" be-
fore this adjustment.
Note 2: Perform the adjustment with the lens in horizontal state.
Note 3: Check that the data of page: 0, address: 10 is "00".
Note 4: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Switch setting
1) POWER ................................................................... CAMERA
Preparations before adjustments:
1) Check that the center of Flange back adjustment chart meets
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.
Adjusting method:
Order Page Address Data
1 0 01 01
2 6 01 13
3 6 01 15
4 6 02
5 F 6F
Note 5: The adjustment data will be automatically input to page:
F, address: 60 to 70.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 0 01 00
3
4
RadarW RadarW RadarW
RadarW RadarW
Procedure
Press PAUSE button.
Press PAUSE button. (Note 5)
Check the data changes to
"01".
Check the data is "00" to
"0E".
Procedure
Press PAUSE button.
Turn OFF the main power
supply.
Perform "Flange Back
Adjustment (2)".
DCR-TRV940/TRV940E/TRV950/TRV950E
5-2. Flange Back Adjustment (2)
Perform this adjustment after performing "Flange Back Adjust-
ment (1)".
Subject
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified value
Note 1: Perform the adjustment with the lens in horizontal state.
Note 2: Check that the data of page: 0, address: 10 is "00".
Note 3: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Switch setting
1) POWER ................................................................... CAMERA
Preparations before adjustments:
1) Set the zoom lens to the TELE end and expose a subject that is
more than 500 m away.
(Subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the
screen)
Adjusting method:
Order Page Address Data
1 0 01
2 6 01
3
4 6 01
5 6 02
6 F 6F
Note 4: The adjustment data will be automatically input to page:
F, address: 60 to 70.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01
2 0 01
3
4
6-27
RadarW RadarW RadarW
Subject more than 500 m away
(Subject with clear contrast such as
buildings, etc.)
Adjusting remote commander
F
60 to 70
Data of page: F, address: 6F is
"00" to "0E"
Procedure
01
13 Press PAUSE button.
Place ND filter on the lens so
that the optimum image is
obtain.
29 Press PAUSE button. (Note 4)
Check the data changes to
"01".
Check the data is "00" to
"0E".
Procedure
00 Press PAUSE button.
00
Turn OFF the main power
supply.
Perform "Flange Back
Check".