Led Indicators And Connectors - Draytek VigorAP 810 User Manual

1 . 2 L E D I n d i c
1 . 2 L E D I n d i c
Before you use the Vigor modem, please get acquainted with the LED indicators and
connectors first.
ACT
USB
LAN B
LAN A1 - A4
WLAN
(Green LED) on
WLAN button
WPS
(Orange LED) on
WLAN button
USB
VigorAP 810 User's Guide
a t o r s a n d C o n
a t o r s a n d C o n
Status
Off
Blinking
On
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
(Green)
Blinking
(Orange)
Connector for a printer.
n e c t o r s
n e c t o r s
Explanation
The system is not ready or is failed.
The system is ready and can work normally.
A USB device is connected and active.
The data is transmitting.
A normal connection is through its corresponding port.
LAN is disconnected.
Data is transmitting (sending/receiving).
A normal connection is through its corresponding port.
LAN is disconnected.
Press the button and release it within 2 seconds. When the
wireless function is ready, the green LED will be on.
Press the button and release it within 2 seconds to turn off
the WLAN function. When the wireless function is not
ready, the LED will be off.
Data is transmitting (sending/receiving).
When WPS function is enabled by web user interface,
press this button for more than 2 seconds to wait for
client's device making network connection through WPS.
When the orange LED blinks with 1 second cycle for 2
minutes, it means that the AP is waiting for wireless client
to connect with it.
2