Draytek VigorAP 810 User Manual page 54

Available settings are explained as follows:
Item
Use internal RADIUS
Server
IP Address
Port
Shared Secret
Session Timeout
After finishing this web page configuration, please click OK to save the settings.
VigorAP 810 User's Guide
Description
There is a RADIUS server built in VigorAP 810 which is used
to authenticate the wireless client connecting to the access
point. Check this box to use the internal RADIUS server for
wireless security.
Besides, if you want to use the external RADIUS server for
authentication, do not check this box.
Please refer to the section, 3.9 RADIUS Server to configure
settings for internal server of VigorAP 810.
Enter the IP address of external RADIUS server.
The UDP port number that the external RADIUS server is
using. The default value is 1812, based on RFC 2138.
The external RADIUS server and client share a secret that is
used to authenticate the messages sent between them. Both
sides must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another authentication
immediately after the first authentication has successfully
completed. (The unit is second.)
44