I-1-1 Led Indicators And Connectors - Draytek VigorAP 903 User Manual

I-1-1 LED Indicators and Connectors

Before you use the Vigor modem, please get acquainted with the LED indicators and connectors first.
LED
ACT
USB
2.4G
5G
LAN A1 - A4
LAN B
Status Explanation
Off The system is not ready or is failed.
Blinking The system is ready and can work normally.
On A USB device is connected and active.
Blinking The data is transmitting.
On Wireless function is ready.
Off Wireless function is not ready.
Blinking Data is transmitting (sending/receiving).
On Wireless function is ready.
Off Wireless function is not ready.
Blinking Data is transmitting (sending/receiving).
On A normal connection (rate with 100M/1000M) is through its
corresponding port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
On A normal connection (rate with 100M/1000M) is through its
corresponding port.
Off LAN is disconnected.
Blinking Data is transmitting (sending/receiving).
Interface
3
Description