Draytek VigorAP 810 User Manual page 66

There are two types of key method: ASCII and Hex. When
you select a key format, the number of characters of key will
be displayed. For example, if you select 64-bit as key length,
and Hex as key format, you'll see the message at the right of
Key Format is 'Hex (10 characters) which means the length of
WEP key is 10 characters.
WEP Keys (Key 1 – Key 4) - Four keys can be entered here,
but only one key can be selected at a time. The format of WEP
Key is restricted to 5 ASCII characters or 10 hexadecimal
values in 64-bit encryption level, or restricted to 13 ASCII
characters or 26 hexadecimal values in 128-bit encryption
level. The allowed content is the ASCII characters from 33(!)
to 126(~) except '#' and ','. Such feature is available for WEP
mode.
Default Key – Choose one of the key settings.
Below shows an example for a wireless profile created.
VigorAP 810 User's Guide
56