Draytek VigorAP 810 User Manual page 29

Security Policy
Power Saving Mode - Choose the power saving mode for such
device.

CAM – Choose this item if it is not necessary to
perform power saving job.

Power Saving Mode – Choose this item to get into
the power saving status when there is no data passing
through the access point.
RTS Threshold- Set the RTS threshold of wireless radio. Do
not modify default value if you don't know what it is, default
value is 2347.
Fragment Threshold - Set the Fragment threshold of wireless
radio. Do not modify default value if you don't know what it is,
default value is 2346.
Security Policy - 802.11 standard defines two mechanisms for
authentication of wireless LAN clients: Open Authentication
and Shared Key Authentication.
Choose one of the security modes from the drop down list. If
you choose OPEN or SHARED, you have to type WEP
information.

OPEN – Open authentication is basically null
authentication algorithm, which means that there
is no verification of the user.

SHARED – It works similar to Open authentication
with only one major difference. If you choose OPEN
with WEP encryption key, the WEP keys is used to
encrypt and decrypt the data but not for authentication.
In Shared key authentication, WEP encryption will be
used for authentication.
If you choose WPA-Personal or WPA2-Personal, the
corresponding WPA settings will be listed as follows.
You have to choose the WPA algorithms and type the
pass phrase for such security mode.

WPA Algorithms – Choose Temporal Key
Integrity Protocol (TKIP) or AES for data
encryption.

Pass Phrase – Please type 8 to 63 alphanumerical
characters here.
19
VigorAP 810 User's Guide