Set-Up; Dishwasher Parameter Modification Procedure - Smeg CW 420 User Manual

Set-up

During first start-up, the functions/parameters listed below must be set or adjusted:

6.1 Dishwasher parameter modification procedure:

Indicator lights showing:
Access "programming mode" by pressing the
a few seconds with the appliance on with the door open
and the tank empty. The display shows UnLo1:58; when
the beep sounds, release the button and press it again at
once. Keep pressing the button again to scroll through all
the modifiable parameters in the following order:
Rinsing temperature (boiler temperature)
Washing temperature (tank temperature)
Quantity of detergent dispensed (if featured), the number
indicates the seconds of peristaltic pump operation)
Quantity of rinse aid dispensed (if featured), the number
indicates the seconds of peristaltic pump operation)
6 SET-UP
off; green;
- CW 420/430
orange; flashing.
button for
14