Rinse Aid Pump (Display And If Required Reset During Maintenance) (If Featured); Detergent Pump (Display And If Required Reset During Maintenance) (If Featured); Energy Consumption - Display And Reset If Required; Service Setting (For After-Sales Service Only) - Smeg CW 420 User Manual

6.10 Rinse aid pump
6.11 Detergent pump
6.12 Energy consumption – Display and reset if required

6.13 Service setting (for After-Sales Service only)

6.14 Starting the peristaltic pumps – rapid filling of detergent and rinse aid
delivery circuit.
Perform after the parameter modification procedure explained in the previous point.
Indicator lights showing:
With the dishwasher powered up, access "programming
mode" by pressing the on/off
the "beep", release the button and press it again quickly
within 0.5 seconds.
The peristaltic pumps continue to operate until the same
button is pressed again. The rinse aid and detergent symbol
- CW 420/430
(display and if required reset during maintenance) (if featured)
(display and if required reset during maintenance) (if featured)
(if featured)
off; green; orange;
button for a few seconds; at
To reset, press
To reset, press
To reset, press
See information on Smegtech
flashing.
19
for 3 seconds.
for 3 seconds.
for 3 seconds.