JVC KD-R960BTS Instruction Manual page 23

AUDIO SETTINGS
PRO EQ (For KD-AR865BTS)
1 USER1/ USER2: Select a preset name.
2 BASS / MID BASS / MID / MID HIGH / HIGH: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 63/ 80/ 100/ 125 HZ
Level:
Q:
MID BASS Frequency: 200/ 250/ 315/ 400 HZ
Level:
Q:
MID Frequency: 630/ 800 HZ/ 1.0/ 1.25 KHZ (Default: 800 HZ
Level:
Q:
MID HIGH Frequency: 2.0/ 2.5/ 3.15/ 4.0 KHZ
Level:
Q:
HIGH Frequency: 6.3/ 8.0/ 10.0/ 12.5 KHZ
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
SPK-OUT *
SUB.W 6
LEVEL * 5
PRE-OUT *
7
SUB.W * 7
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *
5 THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ / MID 85HZ /
HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer.
JS_JVC_KD_R960BTS_J_EN_2.indd 21
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
00 to +06 (+03): Adjusts the output level of the subwoofer
connected via speaker lead. ( 31, 32)
–08 to +08 (00): Adjusts the output level of the subwoofer
connected to the lineout terminals (SW or REAR/SW)
through an external amplifier. ( 31, 32)
SUB.W PHASE *
( Default: 80 HZ
HPF
00
Q1.25)
(Default: 250 HZ
00
FADER
Q1.25)
BALANCE * 8
00
VOL ADJUST
Q1.0)
(Default: 2.5 KHZ
00
Q1.0)
AMP GAIN
(Default: 8.0 KHZ
00
Q1.0)
D.T.EXP
(Digital Track
Expander)
SPK/PRE OUT
* 5
Displayed only when [SUB.W] is set to [ON].
* 6
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 22)
* 7
For unit with 3-pair lineout terminals: Displayed only when [SPK/PRE OUT] is set to
[REAR/REAR] or [SUB.W/SUB.W]. ( 22)
For unit with 2-pair lineout terminals: Displayed only when [SPK/PRE OUT] is set to
[REAR/SUB.W] or [SUB.W/SUB.W]. ( 22)
*
8 This adjustment will not affect the subwoofer output.
5
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
(For KD-AR865BTS)
OFF: All signals are sent to the front/rear speakers. ; LOW 100HZ /
MID 120HZ / HIGH 150HZ: Audio signals with frequencies lower than
100 Hz/ 120 Hz/ 150 Hz are cut off from the front/rear speakers.
R06 — F06 (00): Adjusts the front and rear speaker output balance.
L06 — R06 (00): Adjusts the left and right speaker output balance.
–05 — +05 (00): Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 50.
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
Selects the appropriate setting to get the desired output. ( 22).
21
ENGLISH
23/7/2014 10:37:56 AM