Bluetooth — Mobile Phone - JVC KD-R960BTS Instruction Manual

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– For KD-R960BTS: All the buttons and display flash.
– For KD-AR865BTS / KD-R860BT: All the buttons flash.
– The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16)
During a call:
– The buttons and display illuminate according to the settings made for [COLOR]. ( 23)
– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To
Answer a call
Reject a call
End a call
Adjust the phone volume
[00] to [50] (Default: [15]*)
Switch between hands-
free and private talk
modes
* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
JS_JVC_KD_R960BTS_J_EN_f.indd 15
On the faceplate
Press or the volume knob.
Press and hold or the volume
knob.
Press and hold or the volume
knob.
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press the volume knob during a call.
• Operations may vary according to the
connected Bluetooth mobile phone.
On the remote control
Press .
Press and hold .
Press and hold .
—
—
Improve the voice quality
While talking on the phone....
1 Press and hold
2
Turn the volume knob to make a selection
(see the following table), then press the
knob.
3 2
Repeat step until the desired item is
selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
MIC LEVEL
–10 — +10 (–4): The sensitivity of
the microphone increases as the number
increased.
NOISE RDCT –5 — +5 (0): Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 (0): Adjust the echo
cancellation delay time until the least
echo is being heard during a phone
conversation.
.
Default: XX
15
ENGLISH
25/8/2014 4:01:37 PM