Make A Call - JVC KD-R960BTS Instruction Manual

BLUETOOTH®
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection
(see the following table), then press the
knob.
3 Repeat step 2 until the desired item is
selected or activated.
To return to the previous setting item, press
.
SETTINGS
AUTO ANSWER 01 SEC — 30 SEC: The unit answers
incoming call automatically in
the selected time (in seconds). ;
OFF: Cancels.
16
JS_JVC_KD_R960BTS_J_EN_2.indd 16

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also
possible if your mobile phone has the feature.
Default: XX
1 Press
2
Turn the volume knob to make a selection (see the following table), then press the knob.
3
Repeat step
the selected item.
To return to the previous setting item, press
RECENT CALL
PHONEBOOK
to enter Bluetooth mode.
2
until the desired item is selected/activated or follow the instructions stated on
1 Press the volume knob to select a name or a phone number.
• ">" indicates call received, "<" indicates call made, "M" indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or call number.
2 Press the volume knob to call.
1 Press to select the desired letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the
unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".)
.
23/7/2014 10:37:37 AM