Accessories - Lincoln Electric IM869-D Operator's Manual

C-1
K930-2 TIG Module - Provides high frequency plus a
gas valve for TIG welding. A water valve is available as
an option. Requires 115 volt AC input. (Limited to 250A
- 60% Duty Cycle).
K802-D Power Plug Kit - Kit includes male plug for 20
amp receptacle.
K2641-1 Trailer - A 4-wheel steerable trailer for in-
plant and yard towing with E78-14 load range (B) tube-
less tires. Mounts directly to welder base. (Not for use
on the road.) Comes standard with a Duo-Hitch™, a 2"
Ball and Lunette Eye combination hitch.
K2637-1 Trailer - A 2-wheel trailer designed for road
off road, in-plant and yard towing. Trailer mounts
directly to welder base. Comes standard with a Duo-
Hitch™, a 2" Ball and Lunette Eye combination hitch.
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
1
For highway use, consult applicable federal, state and local laws regarding
possible requirements for brakes, lights, fenders, etc.
WARNING
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
K704 Standard Accessory Kit - Includes electrode
and work cables, headshield, work clamp and elec-
trode holder.
K385-[ ] CV Adapter - Provides constant voltage out-
put for semiautomatic welding. (Field installation only).
K1690-1 GFCI RECEPTACLE KIT
Includes one UL approved 120V ground fault circuit
interrupter duplex type receptacle with cover and
installation instructions. Replaces the factory installed
120V duplex receptacle. Each receptacle of the GFCI
Duplex is rated at 20 Amps, the maximum total current
from the GFCI Duplex is limited to the 20 Amps. Two
kits are required. See the MAINTENANCE section for
detailed information on testing and resetting the GFCI
receptacle.

ACCESSORIES

K1735-1 MULTI-WELD 350 - For multiple arcs from
the DC output of a welding power source. See bulletin
E5.300 for Multi-Weld 350 and distribution system.
K2144-1 Oil Drain Kit- Includes ball valve, hose and
clamp.
K1858-1 Service Indicator Kit- Provides a GO / NO-GO
visual indication of air cleaner element useful service life.
Filter service based on restriction readings allows the longest
life possible from the filter and best engine protection.
(1) ,
SAE-400
C-1