Non-Combustible Materials Speciﬁ Cation; Combustible Materials Speciﬁ Cation; Electrical Codes - Heat & Glo LifeStyle Twilight-II-B Owner's Manual

Hide thumbs Also See for Twilight-II-B:

Table of Contents

Enlarged version

G. Non-Combustible Materials Speciﬁ cation

Material which will not ignite and burn are those consist-

ing entirely of steel, iron, brick, tile, concrete, slate, glass

or plasters, or any combination thereof. Materials that are

reported as passing ASTM E 136, Standard Test Method

for Behavior of Materials in a Vertical Tube Furnace at

750

C, shall be considered non-combustible materials.

H. Combustible Materials Speciﬁ cation

Materials made of or surfaced with wood, compressed paper,

plant ﬁ bers, plastics, or other material that can ignite and

burn, whether ﬂ ame proofed or not, or whether plastered or

unplastered shall be considered combustible materials.

I. Electrical Codes

NOTICE: This appliance must be electrically wired and

grounded in accordance with local codes or, in the absence

of local codes, with National Electric Code ANSI/NFPA

70-latest edition or the Canadian Electric Code CSA

C22.1.

• A 110-120 VAC circuit for this product must be protected

with ground-fault circuit-interrupter protection, in compliance

with the applicable electrical codes, when it is installed in

locations such as in bathrooms or near sinks.

Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. K • 9/08

Table of Contents