C-12
MOUNTING THE SWITCH
15. Remove the plug button from the panel hole.
16. Plug button is no longer needed. Discard.
17, Remove mounting nut from switch. Keep mount-
ing nut for installation.
18. Install switch into panel hole. Ensure washer tab
ACCESSORIES
is fully seated into smaller hole.
19. Reinstall mounting nut onto switch.
Wrench tighten.
RE-ASSEMBLE MACHINE AS FOLLOWS:
20. Reinstall screw into plastic handle (if so
equipped).
21. Reinstall cover.
22. Reinstall door.
23. Reconnect input power to the machine
COMPACT WIRE WELDERS
C-12