Lincoln Electric SVM189-B Service Manual page 98

F-44
FAN MOTOR ASSEMBLY REMOVAL AND REPLACEMENT PROCEDURE
FIGURE F.16 – CENTER PANEL/FAN MOUNTING SCREW LOCATION
1. Remove the input power to the machine.
2. Perform the Case Cover Removal Procedure.
WARNING
ELECTRIC SHOCK can kill.
• Have an electrician install and
service this equipment. Turn the
input power OFF at the fuse box
before working on equipment. Do
not touch electrically hot parts.
------------------------------------------------------------------------
3. Perform the Control Board Removal Procedure.
4. Using a flathead screwdriver, remove the center
panel mounting screws and the fan mounting
screws (depending upon model) located on the
back of the machine. See Figure F.16.
5. Depress any necessary locking tabs on rear of
machine.
TROUBLESHOOTING & REPAIR
(CONTINUED)
2 Phillips
Screws
VIEWED FROM REAR OF MACHINE
COMPACT WIRE WELDERS
Phillips Handle Mount Screw
(only found on 140c/180c models)
4 Phillips Screws
(only found on 140c/180c models)
F-44