Lincoln Electric SVM189-B Service Manual page 32

C-8
The MAGNUM 100XL Spool Gun can be installed in all
machines covered by this Manual.
Machines that are not equiped with a gas solenoid from the
factory must have the K2526-1 MIG Conversion Kit added
before installing the MAGNUM 100XL Spool Gun.
ACCESSORIES
SAFETY PRECAUTIONS
WELDING MACHINES
CAUTION
• Read and understand the welding
machine's instruction manual and
all hazard warnings on equipment
and in the manual.
• Wear the proper personal protec-
tive equipment for welding, includ-
ing but not limited to, safety glass-
es, hearing protection, welding
helmet, welding gloves, and weld-
ing leathers.
------------------------------------------------------------------------
SPOOL GUN
WARNING
ELECTRIC SHOCK CAN KILL.
• The spool of wire may fall out of
the gun if the locking knob is not
installed.
• Metal parts may be at welding
voltage (electrically "hot").
• Metal parts remain at welding voltage for sever-
al seconds after trigger is released. Read warn-
ing label on gun.
• This product shall not be used in precipitation,
or in wet or damp locations.
-------------------------------------------------------------------
RECOMMENDED WELDING MACHINES
COMPACT WIRE WELDERS
C-8